Wood Grain Kitchen Cabinets with Stainless Steel Appliances from Mid Continent Cabinetry

Quiet Close Hinge Adjustment

New Soft Close Adjustment


  1. There are three adjustments for the soft close.
  2. To change the adjustment, the small tab must be moved and the door then fully closed.
  3. The soft close can have light, medium, or heavy slow soft close movement.
  4. For the medium soft close section, the small adjustment tab needs to be in the middle of the adjustment range.
  5. The pictures below show the two positions for light action and heavy action.
  6. With the tab in the middle gives medium action.
  7. The door must be full closed to activate the desired setting.

Soft Close Adjustment

Light soft close action
Notice the plunger is retracted

Heavy soft close action
Notice the plunger is extended



Download our Quite Close Hinge Adjustment PDF


Standard Hinge Adjustment

TEC 864

108° Face Frame Hinge Series with Cam Adjustment

  • 3-dimensional hinge
  • One piece hinge and plate combination with micro side adjustment and cam depth adjustment
  • Available in standard 42mm pattern and 45mm pattern
  • Locating tabs for easy mounting on frames
  • Height adjustment in elongated screw hole
  • Competitively priced
  • All metal construction, nickel finish
  • Works on door thickness from 13mm (1/2") to 19mm (3/4")

TEC 864

Wrap-around baseplate

Maximum Door Thickness and Cup Drilling


Hinge Adjustments

Installation Requirements

For hinge series 864


Download our Standard Hinge Adjustment PDF